Difference between revisions of "Parts Catalog - Pan and Tilt Parts"
From ItsQv
(→Servo Plates) |
|||
(20 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
[[File:BTI.png|link=Current Parts Catalogs|Current Parts Catalogs]]<br> | [[File:BTI.png|link=Current Parts Catalogs|Current Parts Catalogs]]<br> | ||
− | <i><small> | + | [[File:cc_image.png|20px]]<i><small> Mark Qvale - October, 2017</small></i><br> |
<br> | <br> | ||
{| cellspacing="1" cellpadding="1" width="95%" border="0" | {| cellspacing="1" cellpadding="1" width="95%" border="0" | ||
Line 15: | Line 15: | ||
This catalog of parts is a compilation of 3D printed parts that can be combined to make many versions of my Pan and Tilts. There are notes on compatibility and some pieces with sketches or more information.<br><br> | This catalog of parts is a compilation of 3D printed parts that can be combined to make many versions of my Pan and Tilts. There are notes on compatibility and some pieces with sketches or more information.<br><br> | ||
+ | |||
+ | '''NOTE: Do not mix and match the parts found on this page with any parts found in other catalogs or on the Thingiverse site as they likely will not match up.'''<br><br> | ||
=== Project Pages === | === Project Pages === | ||
Line 35: | Line 37: | ||
== Print Parts == | == Print Parts == | ||
− | === | + | === Offset Pan & Tilts === |
+ | === Pan Brackets === | ||
{| border="1" cellspacing="1" cellpadding="1" align="left" width=95% | {| border="1" cellspacing="1" cellpadding="1" align="left" width=95% | ||
Line 51: | Line 54: | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52092.STL 52092.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52092.STL 52092.STL] | ||
| align="Left" | [http://www.itsqv.com/QVM/images/5/51/52092_Sketch.JPG 52092_Sketch] | | align="Left" | [http://www.itsqv.com/QVM/images/5/51/52092_Sketch.JPG 52092_Sketch] | ||
− | | align="Left" | Supports all Camera Plates. See part sketch for mount hole spacing. | + | | align="Left" | Supports all Camera Plates '''shown in this catalog page'''. See part sketch for mount hole spacing. |
|- | |- | ||
| align="Left" | [[File:52093sm.JPG]] | | align="Left" | [[File:52093sm.JPG]] | ||
Line 58: | Line 61: | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52093.STL 52093.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52093.STL 52093.STL] | ||
| align="Left" | [http://www.itsqv.com/QVM/images/0/06/52093_Sketch.JPG 52092_Sketch] | | align="Left" | [http://www.itsqv.com/QVM/images/0/06/52093_Sketch.JPG 52092_Sketch] | ||
− | | align="Left" | Supports all Camera Plates. See part sketch for mount hole spacing. | + | | align="Left" | Supports all Camera Plates '''shown in this catalog page'''. See part sketch for mount hole spacing. |
|- | |- | ||
| align="Left" | [[File:52094sm.JPG]] | | align="Left" | [[File:52094sm.JPG]] | ||
Line 65: | Line 68: | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52094.STL 52094.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52094.STL 52094.STL] | ||
| align="Left" | [http://www.itsqv.com/QVM/images/c/c9/52094_Sketch.JPG 52092_Sketch] | | align="Left" | [http://www.itsqv.com/QVM/images/c/c9/52094_Sketch.JPG 52092_Sketch] | ||
− | | align="Left" | Supports all Camera Plates. See part sketch for mount hole spacing. | + | | align="Left" | Supports all Camera Plates '''shown in this catalog page'''. See part sketch for mount hole spacing. |
|} | |} | ||
{{Clear1}} | {{Clear1}} | ||
Line 85: | Line 88: | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52062.STL 52062.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52062.STL 52062.STL] | ||
| align="Left" | 52062_Sketch | | align="Left" | 52062_Sketch | ||
− | | align="Left" | Fits all | + | | align="Left" | Fits all Pan Brackets '''shown in this catalog page'''. Designed for the RunCam Split & Split v2 cameras. Use with 52067 and 52076 for v1 or 52135 for v2 |
|- | |- | ||
| align="Left" | [[File:52089sm.JPG]] | | align="Left" | [[File:52089sm.JPG]] | ||
Line 92: | Line 95: | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52089.STL 52089.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52089.STL 52089.STL] | ||
| align="Left" | 52089_Sketch | | align="Left" | 52089_Sketch | ||
− | | align="Left" | Fits all | + | | align="Left" | Fits all Pan Brackets '''shown in this catalog page'''. Designed for the HS1177, 26mm x 26mm camera |
|- | |- | ||
| align="Left" | [[File:52090sm.JPG]] | | align="Left" | [[File:52090sm.JPG]] | ||
Line 99: | Line 102: | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52090.STL 52090.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52090.STL 52090.STL] | ||
| align="Left" | 52090_Sketch | | align="Left" | 52090_Sketch | ||
− | | align="Left" | Fits all | + | | align="Left" | Fits all Pan Brackets '''shown in this catalog page'''. Designed for the RunCam Eagle v1 camera |
|- | |- | ||
| align="Left" | [[File:52091sm.JPG]] | | align="Left" | [[File:52091sm.JPG]] | ||
Line 106: | Line 109: | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52091.STL 52091.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52091.STL 52091.STL] | ||
| align="Left" | 52091_Sketch | | align="Left" | 52091_Sketch | ||
− | | align="Left" | Fits all | + | | align="Left" | Fits all Pan Brackets '''shown in this catalog page'''. Designed for the RunCam eagle v2 camera |
|- | |- | ||
| align="Left" | [[File:52095sm.JPG]] | | align="Left" | [[File:52095sm.JPG]] | ||
Line 113: | Line 116: | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52095.STL 52095.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52095.STL 52095.STL] | ||
| align="Left" | 52095_Sketch | | align="Left" | 52095_Sketch | ||
− | | align="Left" | Fits all | + | | align="Left" | Fits all Pan Brackets '''shown in this catalog page'''. Simple HD camera platform for Runcam2, Mobius, Foxeer Legend, etc. |
|- | |- | ||
| align="Left" | [[File:52096sm.JPG]] | | align="Left" | [[File:52096sm.JPG]] | ||
Line 120: | Line 123: | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52096.STL 52096.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52096.STL 52096.STL] | ||
| align="Left" | 52096_Sketch | | align="Left" | 52096_Sketch | ||
− | | align="Left" | Fits all | + | | align="Left" | Fits all Pan Brackets '''shown in this catalog page'''. Designed to fit mini FPV cam by Eachine, etc. |
|- | |- | ||
| align="Left" | [[File:52097sm.JPG]] | | align="Left" | [[File:52097sm.JPG]] | ||
Line 127: | Line 130: | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52097.STL 52097.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52097.STL 52097.STL] | ||
| align="Left" | 52097_Sketch | | align="Left" | 52097_Sketch | ||
− | | align="Left" | Fits all | + | | align="Left" | Fits all Pan Brackets '''shown in this catalog page'''. Designed to fit mini FPV cam by FatShark, etc. |
+ | |- | ||
+ | | align="Left" | [[File:52216sm.JPG]] | ||
+ | | align="Left" | '''52216''' | ||
+ | | align="Left" | Camera plate, 28mm | ||
+ | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52216.STL 52216.STL] | ||
+ | | align="Left" | 52216_Sketch | ||
+ | | align="Left" | Fits all Pan Brackets '''shown in this catalog page'''. Designed to fit Foxeer Monster V3 (28mm wide with bracket), etc. | ||
|} | |} | ||
{{Clear1}} | {{Clear1}} | ||
Line 166: | Line 176: | ||
| align="Left" | '''52100''' | | align="Left" | '''52100''' | ||
| align="Left" | Servo plate, flat, raised | | align="Left" | Servo plate, flat, raised | ||
− | | align="Center" | [http://www.itsqv.com/QVM/files/parts/ | + | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52100a.STL 52100.STL] |
| align="Left" | 52100_Sketch | | align="Left" | 52100_Sketch | ||
| align="Left" | Fits Turnigy RS5180MG servo or similar. Servo only, no gearing. | | align="Left" | Fits Turnigy RS5180MG servo or similar. Servo only, no gearing. | ||
Line 193: | Line 203: | ||
{{Clear1}} | {{Clear1}} | ||
− | === Assembly Parts === | + | === Compact Pan & Tilt Parts === |
+ | |||
+ | This build page for this Pan & Tilt also known as the "Simple Centered Pan & Tilt" can be found in the following article: <u>[[Simple_Centered_Pan_%26_Tilt|Simple Centered Pan & Tilt]]</u> | ||
+ | <br> | ||
+ | |||
+ | {| border="0" cellspacing="0" cellpadding="0" align="center" | ||
+ | |- | ||
+ | | align="center" | [[File:PNT01.JPG]] | ||
+ | |} | ||
+ | <br> | ||
+ | |||
+ | {| border="1" cellspacing="1" cellpadding="1" align="left" width=95% | ||
+ | |- | ||
+ | | width="190" align="Left" | '''Image''' | ||
+ | | width="75" align="Center" | '''Part Number''' | ||
+ | | width="230" align="Left" | '''Part Description''' | ||
+ | | width="100" align="Center" | '''Print File''' | ||
+ | | width="100" align="Center" | '''Drawing''' | ||
+ | | align="Left" | '''Compatibility''' | ||
+ | |- | ||
+ | | align="Left" | [[File:10038sm.JPG]] | ||
+ | | align="Left" | '''10038''' | ||
+ | | align="Left" | Compact PnT Servo Plate | ||
+ | | align="Center" | [http://www.itsqv.com/QVM/files/parts/10038.STL 10038.STL] | ||
+ | | align="Left" | 10038_Sketch | ||
+ | | align="Left" | Servo Mount, Deck Plate | ||
+ | |- | ||
+ | | align="Left" | [[File:47018sm.JPG]] | ||
+ | | align="Left" | '''47018''' | ||
+ | | align="Left" | Compact PnT Lower Bracket | ||
+ | | align="Center" | [http://www.itsqv.com/QVM/files/parts/47018.STL 47018.STL] | ||
+ | | align="Left" | 47018_Sketch | ||
+ | | align="Left" | Tilt Pivot | ||
+ | |- | ||
+ | | align="Left" | [[File:47019sm.JPG]] | ||
+ | | align="Left" | '''47019''' | ||
+ | | align="Left" | Compact PnT Camera Plate | ||
+ | | align="Center" | [http://www.itsqv.com/QVM/files/parts/47019.STL 47019.STL] | ||
+ | | align="Left" | 47019_Sketch | ||
+ | | align="Left" | Mobius, RunCam2, etc. | ||
+ | |} | ||
+ | {{Clear1}} | ||
+ | |||
+ | === Misc Assembly Parts === | ||
{| border="1" cellspacing="1" cellpadding="1" align="left" width=95% | {| border="1" cellspacing="1" cellpadding="1" align="left" width=95% | ||
Line 237: | Line 290: | ||
| align="Center" | [http://www.itsqv.com/QVM/files/parts/52109.STL 52109.STL] | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52109.STL 52109.STL] | ||
| align="Left" | 52109_Sketch | | align="Left" | 52109_Sketch | ||
− | | align="Left" | Attaches to 52094, | + | | align="Left" | Attaches to 52094, Pan bracket to make assembly. |
|- | |- | ||
| align="Left" | [[File:52113sm.JPG]] | | align="Left" | [[File:52113sm.JPG]] | ||
Line 259: | Line 312: | ||
| align="Left" | 52115_Sketch | | align="Left" | 52115_Sketch | ||
| align="Left" | Creates a simple Pan only camera deck on the HD unit. This deck is angled to 4 degrees. | | align="Left" | Creates a simple Pan only camera deck on the HD unit. This deck is angled to 4 degrees. | ||
+ | |- | ||
+ | | align="Left" | [[File:52067sm.JPG]] | ||
+ | | align="Left" | '''52067''' | ||
+ | | align="Left" | RunCam Split v1 PCB Cover, Top | ||
+ | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52067.STL 52067.STL] | ||
+ | | align="Left" | 52067_Sketch | ||
+ | | align="Left" | Pair with 52062 camera plate for RunCam Split v1 | ||
+ | |- | ||
+ | | align="Left" | [[File:52076sm.JPG]] | ||
+ | | align="Left" | '''52076''' | ||
+ | | align="Left" | RunCam Split v1 SD Card Cover | ||
+ | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52076.STL 52076.STL] | ||
+ | | align="Left" | 52076_Sketch | ||
+ | | align="Left" | Pair with 52062 camera plate for RunCam Split v1. Snaps into 52067 top cover | ||
+ | |- | ||
+ | | align="Left" | [[File:52135sm.jpg]] | ||
+ | | align="Left" | '''52135''' | ||
+ | | align="Left" | RunCam Split v2 PCB Cover, Top | ||
+ | | align="Center" | [http://www.itsqv.com/QVM/files/parts/52135.STL 52135.STL] | ||
+ | | align="Left" | 52135_Sketch | ||
+ | | align="Left" | Pair with 52062 camera plate for RunCam Split v2 | ||
|} | |} | ||
{{Clear1}} | {{Clear1}} | ||
Line 284: | Line 358: | ||
| align="center" | [[File:PnT83.JPG|400px]] [[File:PnT84.JPG|400px]] | | align="center" | [[File:PnT83.JPG|400px]] [[File:PnT84.JPG|400px]] | ||
|} | |} | ||
+ | <br><br> | ||
+ | |||
+ | == See Also == | ||
+ | |||
+ | :* [[Parts Catalog - General Parts]] | ||
+ | :* [[Parts Catalog - Mini Talon]] | ||
+ | :* [[Parts Catalog - Pan and Tilt Parts]] | ||
+ | <br> | ||
+ | |||
+ | Build Pages-<br> | ||
+ | :* [[Forward Offset Pan %26 Tilt]] | ||
+ | :* [[Lightweight Pan and Tilt]] | ||
+ | :* [[Heavy Duty Pan and Tilt]] | ||
+ | :* [[390 Geared Pan and Tilt]] | ||
+ | :* [[RunCam Split Dedicated Pan and Tilt]] | ||
+ | <br><br> | ||
+ | |||
+ | === Comments? Questions? === | ||
+ | :* '''<u>[mailto:qmar80@hotmail.com?Subject=About%20The%20Pan%20and%20Tilt%20catalog%20parts&body=Question? email me!]</u>''' | ||
Latest revision as of 21:00, 29 July 2020
Introduction
This catalog of parts is a compilation of 3D printed parts that can be combined to make many versions of my Pan and Tilts. There are notes on compatibility and some pieces with sketches or more information.
NOTE: Do not mix and match the parts found on this page with any parts found in other catalogs or on the Thingiverse site as they likely will not match up.
Project Pages
You can check these pages for more information on some of my builds.
In this Wiki
Thingiverse
Print Parts
Offset Pan & Tilts
Pan Brackets
Image | Part Number | Part Description | Print File | Drawing | Compatibility |
52092 | Lower bracket, small | 52092.STL | 52092_Sketch | Supports all Camera Plates shown in this catalog page. See part sketch for mount hole spacing. | |
52093 | Lower bracket, medium | 52093.STL | 52092_Sketch | Supports all Camera Plates shown in this catalog page. See part sketch for mount hole spacing. | |
52094 | Lower bracket, large | 52094.STL | 52092_Sketch | Supports all Camera Plates shown in this catalog page. See part sketch for mount hole spacing. |
Camera Plates
Image | Part Number | Part Description | Print File | Drawing | Compatibility |
52062 | Camera plate, RunCam Split | 52062.STL | 52062_Sketch | Fits all Pan Brackets shown in this catalog page. Designed for the RunCam Split & Split v2 cameras. Use with 52067 and 52076 for v1 or 52135 for v2 | |
52089 | Camera plate, HS1177 | 52089.STL | 52089_Sketch | Fits all Pan Brackets shown in this catalog page. Designed for the HS1177, 26mm x 26mm camera | |
52090 | Camera plate, RunCam Eagle v1 | 52090.STL | 52090_Sketch | Fits all Pan Brackets shown in this catalog page. Designed for the RunCam Eagle v1 camera | |
52091 | Camera plate, RunCam Eagle v2 | 52091.STL | 52091_Sketch | Fits all Pan Brackets shown in this catalog page. Designed for the RunCam eagle v2 camera | |
52095 | Camera plate, standard | 52095.STL | 52095_Sketch | Fits all Pan Brackets shown in this catalog page. Simple HD camera platform for Runcam2, Mobius, Foxeer Legend, etc. | |
52096 | Camera plate, 18mm mini | 52096.STL | 52096_Sketch | Fits all Pan Brackets shown in this catalog page. Designed to fit mini FPV cam by Eachine, etc. | |
52097 | Camera plate, 21mm mini | 52097.STL | 52097_Sketch | Fits all Pan Brackets shown in this catalog page. Designed to fit mini FPV cam by FatShark, etc. | |
52216 | Camera plate, 28mm | 52216.STL | 52216_Sketch | Fits all Pan Brackets shown in this catalog page. Designed to fit Foxeer Monster V3 (28mm wide with bracket), etc. |
Servo Plates
Image | Part Number | Part Description | Print File | Drawing | Compatibility |
52063 | Servo plate, geared, raised | 52063.STL | 52063_Sketch | Fits Turnigy RS5180MG servo or similar. | |
52098 | Servo plate, geared, flat | 52098.STL | 52098_Sketch | Fits Turnigy RS5180MG servo or similar. | |
52099 | Servo plate, angled | 52099.STL | 52099_Sketch | Fits Turnigy RS5180MG servo or similar. Servo only, no gearing. | |
52100 | Servo plate, flat, raised | 52100.STL | 52100_Sketch | Fits Turnigy RS5180MG servo or similar. Servo only, no gearing. | |
52111 | Servo plate, HD PnT, large | 52111.STL | 52111_Sketch | Fits GWS S125-1T 360 deg servo or similar. | |
52112 | Servo plate, HD PnT, small | 52112.STL | 52112_Sketch | Fits GWS S125-1T 360 deg servo or similar. | |
52116 | Deck plate, HD PnT | 52116.STL | 52116_Sketch | Replaces the bearing plate on the HD set-up. Allows a clean deck mount with the servo below. |
Compact Pan & Tilt Parts
This build page for this Pan & Tilt also known as the "Simple Centered Pan & Tilt" can be found in the following article: Simple Centered Pan & Tilt
Image | Part Number | Part Description | Print File | Drawing | Compatibility |
10038 | Compact PnT Servo Plate | 10038.STL | 10038_Sketch | Servo Mount, Deck Plate | |
47018 | Compact PnT Lower Bracket | 47018.STL | 47018_Sketch | Tilt Pivot | |
47019 | Compact PnT Camera Plate | 47019.STL | 47019_Sketch | Mobius, RunCam2, etc. |
Misc Assembly Parts
Image | Part Number | Part Description | Print File | Drawing | Compatibility |
2205 | Bearing plate, HD-PnT | 2205.STL | 2205_Sketch | Carries and supports the 0.375"ID x 0.625"OD x 0.156"T bearing. | |
52064 | Light weight PnT deck spacer, 5mm | 52064.STL | 52064_Sketch | Supports all non-HD servo plates. | |
52080 | Pan turret, HD-PnT, short | 52080.STL | 52080_Sketch | Creates a simple Pan only on the HD unit. | |
52082 | Servo coupler, HD-PnT | 52082.STL | 52082_Sketch | Connects GWS servo to Yaw plate assembly or simple cam plate. | |
52109 | Upper yaw bracket coupler | 52109.STL | 52109_Sketch | Attaches to 52094, Pan bracket to make assembly. | |
52113 | Cam plate, geared PnT, 4 degree | 52113.STL | 52113_Sketch | Replaces tilt parts on geared PnT. Makes a "Pan only" set-up. | |
52114 | Pinion gear mount, geared PnT | 52114.STL | 52114_Sketch | Main component of geared pinion assembly. | |
52115 | Pan turret, HD-PnT, tall, 4 degree | 52115.STL | 52115_Sketch | Creates a simple Pan only camera deck on the HD unit. This deck is angled to 4 degrees. | |
52067 | RunCam Split v1 PCB Cover, Top | 52067.STL | 52067_Sketch | Pair with 52062 camera plate for RunCam Split v1 | |
52076 | RunCam Split v1 SD Card Cover | 52076.STL | 52076_Sketch | Pair with 52062 camera plate for RunCam Split v1. Snaps into 52067 top cover | |
52135 | RunCam Split v2 PCB Cover, Top | 52135.STL | 52135_Sketch | Pair with 52062 camera plate for RunCam Split v2 |
Typical Assemblies
Simple Pan and Tilt
Geared Pan and Tilt
Heavy Duty Pan and Tilt
See Also
- Parts Catalog - General Parts
- Parts Catalog - Mini Talon
- Parts Catalog - Pan and Tilt Parts
Build Pages-
Comments? Questions?