Difference between revisions of "Prop Test - 9 and 10 inch props for FPV"

From ItsQv
Jump to: navigation, search
Line 13: Line 13:
 
== About this test ==
 
== About this test ==
  
This test was done to compare nine and ten inch props popular on many smaller FPV planes. Three test runs were done for each prop and averaged to get stabilized results. All tests were done using a regulated power supply set to 14.8v to emulate the nominal voltage of a 4S pack. Two test protocols were followed, 1st a wide open throttle test and 2nd a low level power test. The motor used is a Cobra 2814/16-1050kv.
+
This test was done to compare nine and ten inch props popular on many smaller FPV planes. Three test runs were done for each prop and averaged to get stabilized results. All tests were done using a regulated power supply set to 14.8v to emulate the nominal voltage of a 4S pack. Two test protocols were followed, 1st a wide open throttle test and 2nd a low level power test. The motor used is a Cobra 2814/16-1050kv.<br><br>
 
+
  
 
{| border="0" cellspacing="1" cellpadding="1" width="900" align="center"
 
{| border="0" cellspacing="1" cellpadding="1" width="900" align="center"
Line 23: Line 22:
 
|}
 
|}
 
<br>
 
<br>
 +
 +
== See Also ==
 +
 +
TBA
 +
 +
<br><br><br>
 +
 +
[[Category:Contents]]
 +
[[Category:Props]]

Revision as of 22:04, 19 May 2016

Testing
March 2016

700px
  Props!

About this test

This test was done to compare nine and ten inch props popular on many smaller FPV planes. Three test runs were done for each prop and averaged to get stabilized results. All tests were done using a regulated power supply set to 14.8v to emulate the nominal voltage of a 4S pack. Two test protocols were followed, 1st a wide open throttle test and 2nd a low level power test. The motor used is a Cobra 2814/16-1050kv.

NFX13.png
9 & 10 inch prop results


See Also

TBA