Banggood C1 Chaser Wing

January 2017

	Small Package - Big Fun!

Introduction

Another wing! I was looking for something smaller, easy to throw in the car or on my FPV backpack. A fellow RCGroups poster brought this up in a post so I checked it out and was pleasantly surprised by what I saw. It is basically the "missing link" between the 1550mm FX-61 and the 800mm WingWing Z-84!

So I ordered the kit and was again very pleased with the plane itself when it arrived. It has some great features like bottom mounted servos with through-wing accomodations for top-side linkage. This keeps the weight low in the airframe and also keeps the linkage from snagging on grass or weeds when landing. It has two different nose pieces, one for a camera and one that is just solid EPO. The Hatch has a front key to hold the nose down and two snap in hold downs that seem to work very well. It also comes with a nice low profile tow hook and skid piece.

General Specifications

Distributor - BangGood USA
Aircraft - C1 Chaser Wing
Build Date - January, 2017

Airframe Type -	Wing - FPV Specialist		Flying Type -	Powered FPV Glider Wing
Wingspan -	47.25 inches (1200mm)		Length -	19 inches (483mm)
Wing Area -	2.80 ft^2 (26dm^2)		All-Up Weight (as built) -	31.6oz (895g)
Motor -	Cobra 2213/22-1100kv		Wing Load -	11.3 oz/ft^2 (34g/dm^2)
Propeller -	8 x 7 Aeronaut Folder		Max Motor Power -	276 watts
Static Thrust -	32oz (917g) @ 2550ft ASL		Static Thrust/Weight -	1.02:1
Battery Type -	4S1P LiIon		Capacity -	3500mah/3C
In flight efficiency -	TBA mAh/mile		Flight Time -	Up to TBA minutes