Difference between revisions of "Parts Catalog - Pan and Tilt Parts"
From ItsQv
(→Yaw Brackets) |
(→Yaw Brackets) |
||
Line 35: | Line 35: | ||
== Print Parts == | == Print Parts == | ||
− | === | + | === Pan Brackets === |
{| border="1" cellspacing="1" cellpadding="1" align="left" width=95% | {| border="1" cellspacing="1" cellpadding="1" align="left" width=95% |
Revision as of 12:12, 25 January 2018
Introduction
This catalog of parts is a compilation of 3D printed parts that can be combined to make many versions of my Pan and Tilts. There are notes on compatibility and some pieces with sketches or more information.
Project Pages
You can check these pages for more information on some of my builds.
In this Wiki
Thingiverse
Print Parts
Pan Brackets
Image | Part Number | Part Description | Print File | Drawing | Compatibility |
52092 | Lower bracket, small | 52092.STL | 52092_Sketch | Supports all Camera Plates shown in this catalog page. See part sketch for mount hole spacing. | |
52093 | Lower bracket, medium | 52093.STL | 52092_Sketch | Supports all Camera Plates shown in this catalog page. See part sketch for mount hole spacing. | |
52094 | Lower bracket, large | 52094.STL | 52092_Sketch | Supports all Camera Plates shown in this catalog page. See part sketch for mount hole spacing. |
Camera Plates
Image | Part Number | Part Description | Print File | Drawing | Compatibility |
52062 | Camera plate, RunCam Split | 52062.STL | 52062_Sketch | Fits all Yaw Brackets. Designed for the RunCam Split & Split v2 cameras. Use with 52067 and 52076 for v1 or 52135 for v2 | |
52089 | Camera plate, HS1177 | 52089.STL | 52089_Sketch | Fits all Yaw Brackets. Designed for the HS1177, 26mm x 26mm camera | |
52090 | Camera plate, RunCam Eagle v1 | 52090.STL | 52090_Sketch | Fits all Yaw Brackets. Designed for the RunCam Eagle v1 camera | |
52091 | Camera plate, RunCam Eagle v2 | 52091.STL | 52091_Sketch | Fits all Yaw Brackets. Designed for the RunCam eagle v2 camera | |
52095 | Camera plate, standard | 52095.STL | 52095_Sketch | Fits all Yaw Brackets. Simple HD camera platform for Runcam2, Mobius, Foxeer Legend, etc. | |
52096 | Camera plate, 18mm mini | 52096.STL | 52096_Sketch | Fits all Yaw Brackets. Designed to fit mini FPV cam by Eachine, etc. | |
52097 | Camera plate, 21mm mini | 52097.STL | 52097_Sketch | Fits all Yaw Brackets. Designed to fit mini FPV cam by FatShark, etc. |
Servo Plates
Image | Part Number | Part Description | Print File | Drawing | Compatibility |
52063 | Servo plate, geared, raised | 52063.STL | 52063_Sketch | Fits Turnigy RS5180MG servo or similar. | |
52098 | Servo plate, geared, flat | 52098.STL | 52098_Sketch | Fits Turnigy RS5180MG servo or similar. | |
52099 | Servo plate, angled | 52099.STL | 52099_Sketch | Fits Turnigy RS5180MG servo or similar. Servo only, no gearing. | |
52100 | Servo plate, flat, raised | 52100.STL | 52100_Sketch | Fits Turnigy RS5180MG servo or similar. Servo only, no gearing. | |
52111 | Servo plate, HD PnT, large | 52111.STL | 52111_Sketch | Fits GWS S125-1T 360 deg servo or similar. | |
52112 | Servo plate, HD PnT, small | 52112.STL | 52112_Sketch | Fits GWS S125-1T 360 deg servo or similar. | |
52116 | Deck plate, HD PnT | 52116.STL | 52116_Sketch | Replaces the bearing plate on the HD set-up. Allows a clean deck mount with the servo below. |
Assembly Parts
Image | Part Number | Part Description | Print File | Drawing | Compatibility |
2205 | Bearing plate, HD-PnT | 2205.STL | 2205_Sketch | Carries and supports the 0.375"ID x 0.625"OD x 0.156"T bearing. | |
52064 | Light weight PnT deck spacer, 5mm | 52064.STL | 52064_Sketch | Supports all non-HD servo plates. | |
52080 | Pan turret, HD-PnT, short | 52080.STL | 52080_Sketch | Creates a simple Pan only on the HD unit. | |
52082 | Servo coupler, HD-PnT | 52082.STL | 52082_Sketch | Connects GWS servo to Yaw plate assembly or simple cam plate. | |
52109 | Upper yaw bracket coupler | 52109.STL | 52109_Sketch | Attaches to 52094, Yaw bracket to make assembly. | |
52113 | Cam plate, geared PnT, 4 degree | 52113.STL | 52113_Sketch | Replaces tilt parts on geared PnT. Makes a "Pan only" set-up. | |
52114 | Pinion gear mount, geared PnT | 52114.STL | 52114_Sketch | Main component of geared pinion assembly. | |
52115 | Pan turret, HD-PnT, tall, 4 degree | 52115.STL | 52115_Sketch | Creates a simple Pan only camera deck on the HD unit. This deck is angled to 4 degrees. | |
52067 | RunCam Split v1 PCB Cover, Top | 52067.STL | 52067_Sketch | Pair with 52062 camera plate for RunCam Split v1 | |
52076 | RunCam Split v1 SD Card Cover | 52076.STL | 52076_Sketch | Pair with 52062 camera plate for RunCam Split v1. Snaps into 52067 top cover | |
52135 | RunCam Split v2 PCB Cover, Top | 52135.STL | 52135_Sketch | Pair with 52062 camera plate for RunCam Split v2 |
Typical Assemblies
Simple Pan and Tilt
Geared Pan and Tilt
Heavy Duty Pan and Tilt
See Also
- Parts Catalog - General Parts
- Parts Catalog - Mini Talon
- Parts Catalog - Pan and Tilt Parts