View source for Turnigy 9XR & 9XR Pro Feet and Stand

[[File:BTI.png|link=GIMBALS|Gimbals]]<br>
<i>August 2014</i><br>
<br>
{| cellspacing="1" cellpadding="1" width="95%" border="0"
|-
| align="left" valign="bottom" width="50%" | __TOC__ 
| align="right" width="50%" | [[File:X9R_Stand.jpg|600px]]
|}

== Introduction ==

Tired of your 9XR tipping over?<br>
:* Download and print the feet and it will stand up and stay there.
:* Download and print the two stand parts and you'll have all your bases covered.<br><br>

=== Instructions ===

:* For the feet you will need 2 #2 Flathead x 1/4" self taping screws
:* For the stand you will need 4x 3mm x 16mm socket head screws and two lock nuts<br><br>

== Print Files ==

:* http://www.thingiverse.com/thing:648524/#files



<br><br><br>
[[Category:Contents]]