Prop Test - 9 and 10 inch props for FPV
From ItsQv
Revision as of 21:50, 19 May 2016 by WikiSysop (Talk | contribs) (Created page with "Testing<br> <i>March 2016</i><br> <br> {| cellspacing="1" cellpadding="1" width="95%" border="0" |- | align="left" valign="bott...")
March 2016
Contents |
700px |
| Props! |
About this test
This test was done to compare nine and ten inch props popular on many smaller FPV planes. Three test runs were done for each prop and averaged to get stabilized results. All tests were done using a regulated power supply set to 14.8v to emulate the nominal voltage of a 4S pack. Two test protocols were followed, 1st a wide open throttle test and 2nd a low level power test. The motor used is a Cobra 2814/16-1050kv.
|
| 9 & 10 inch prop results |
