Parts Catalog - General Parts

© Mark Qvale - October, 2017

Introduction

Like the Mini Talon Parts Compilation Page, this is a collection of 3D print parts. The parts on this page are more general in nature which means they can be used on different airframes and applications. These have all been printed and tested.

Many of the parts found here are also on my Thingiverse pages although since all parts are published here first, this is where you will find the most current versions. As on Thingiverse, everything found here is protected by Copyright and licensed under the terms of the Creative Commons "Attribution-NonCommercial-ShareAlike 4.0 International" license.

NOTE: This catalog will constantly change with additions and revision changes.

General Parts

Aeronaut Prop Parts

Image	Part Number	Part Description	Weight	Print File	Drawing	Compatibility
	10001	Prop Stop Insert 38mm x 5mm	6g	10001.STL	10001_Sketch	Fits all Aeronaut 38mm Yokes.
	10002	Prop Stop Insert 38mm x 6mm	6g	10002.STL	10002_Sketch	Fits all Aeronaut 38mm Yokes.
	10003	Prop Stop Insert 38mm x 8mm	6g	10003.STL	10003_Sketch	Fits all Aeronaut 38mm Yokes.
	10004	Prop Stop Insert 42mm x 5mm	7g	10004.STL	10004_Sketch	Fits all Aeronaut 42mm Yokes.
	10005	Prop Stop Insert 42mm x 5mm	7g	10005.STL	10005_Sketch	Fits all Aeronaut 42mm Yokes.
	10006	Prop Stop Insert 42mm x 5mm	7g	10006.STL	10006_Sketch	Fits all Aeronaut 42mm Yokes.
	10011	Prop Stop Insert 35mm x 5mm	7g	10011.STL	10011_Sketch	Fits HobbyKing 35mm Yokes.

Antenna SMA Flare Nut Wrench

Image	Part Number	Part Description	Weight	Print File	Drawing	Compatibility
	10012	Antenna SMA flare nut wrench	5g	10012.STL	10012_Sketch	Thumb wrench for SMA connectors.

Battery Strap Guides

Image	Part Number	Part Description	Weight	Print File	Drawing	Compatibility
	10015	Battery Strap Guide 35mm	5g	10015.STL	10015_Sketch	Flat, external battery strap guide
	10016	Battery Strap Guide 40mm	5g	10016.STL	10016_Sketch	Flat, external battery strap guide, 40mm wide
	10017	Battery Strap Guide 50mm	5g	10017.STL	10017_Sketch	Flat, external battery strap guide, 50mm wide

DragonLink Parts

MicroRX Saddle Mounts

Image	Part Number	Part Description	Weight	Print File	Drawing	Compatibility
	47016	DragonLink MicroRX Mount	5g	47016.STL	47016_Sketch	DragonLink MicroRX Mount for v2 RX
	47017	DragonLink MicroRX v3 Mount	5g	47017.STL	47017_Sketch	DragonLink MicroRX Mount for v3 RX

RX Dipole Antenna Mount

Image	Part Number	Part Description	Weight	Print File	Drawing	Compatibility
	52040	DragonLink 433 Antenna Mount LT	5g	52040.STL	52040_Sketch	DragonLink 433 Antenna Mount left half
	52041	DragonLink 433 Antenna Mount RT	5g	52041.STL	52041_Sketch	DragonLink 433 Antenna Mount right half

Li-ion Pack Caps

Image	Part Number	Part Description	Weight	Print File	Drawing	Compatibility
	10018	Li-ion Cap, 2x, A	3.0g	10018.STL	10018_Sketch	Li-ion battery pack cap for 2 cells, A end
	10019	Li-ion Cap, 2x, B	3.0g	10019.STL	10019_Sketch	Li-ion battery pack cap for 2 cells, B end
	10020	Inline Li-ion Cap, 3x, A	3.7g	10020.STL	10020_Sketch	Inline Li-ion battery pack cap for 3 cells, A end
	10021	Inline Li-ion Cap, 3x, B	3.7g	10021.STL	10021_Sketch	Inline Li-ion battery pack cap for 3 cells, B end
	10022	Stacked Li-ion Cap, 3x, A	4.1g	10022.STL	10022_Sketch	Stacked Li-ion battery pack cap for 3 cells, A end
	10023	Stacked Li-ion Cap, 3x, B	4.1g	10023.STL	10023_Sketch	Stacked Li-ion battery pack cap for 3 cells, B end
	10024	Stacked Li-ion Separator, 3x	0.6g	10024.STL	10024_Sketch	Stacked Li-ion battery pack separator for 3 cells
	10025	Inline Li-ion Cap, 4x, A	4.9g	10025.STL	10025_Sketch	Inline Li-ion battery pack cap for 4 cells, A end
	10026	Inline Li-ion Cap, 4x, B	4.9g	10026.STL	10026_Sketch	Inline Li-ion battery pack cap for 4 cells, B end
	10027	Square Li-ion Cap, 4x, A	4.7g	10027.STL	10027_Sketch	Square Li-ion battery pack cap for 4 cells, A end
	10028	Stacked Li-ion Cap, 4x, B	4.7g	10028.STL	10028_Sketch	Stacked Li-ion battery pack cap for 4 cells, B end
	10029	Square Li-ion Separator, 4x	0.8g	10029.STL	10029_Sketch	Square Li-ion battery pack separator for 4 cells

NACA Style Ducts

Straight Ducts

Image	Part Number	Part Description	Weight	Print File	Drawing	Compatibility
	52120	NACA Duct, 22mm, straight	5g	52120.STL	52120_Sketch	General NACA Duct with a 22mm opening
	52121	NACA Duct, 32mm, straight	5g	52121.STL	52121_Sketch	General NACA Duct with a 32mm opening

Curved Ducts

Image	Part Number	Part Description	Weight	Print File	Drawing	Compatibility
	52122	NACA Duct, 22mm, Curved	5g	52122.STL	52122_Sketch	Fits a slightly curved surface
	52123	NACA Duct, 32mm, curved	5g	52123.STL	52123_Sketch	Fits a slightly curved surface
	52125	NACA Duct, 20mm, curved	5g	52125.STL	52125_Sketch	Fits a slightly curved surface

Specific Airframes

Image	Part Number	Part Description	Weight	Print File	Drawing	Compatibility
	52119	NACA Duct FX-61	5g	52119.STL	52119_Sketch	These ducts fit over the bottom finger holes in the FX-61
	52124	NACA Duct, Nano-Talon Hatch	5g	52124.STL	52124_Sketch	Replaces the lame NACA duct on the Nano Talon
	52126	NACA Duct, Mini Talon Hatch	5g	52126.STL	52126_Sketch	Fits the Mini Talon hatch

Pitot Tube Mounts

Standard APM Mount

Mounted on one of my Mini Talons

Image	Part Number	Part Description	Weight	Print File	Drawing	Compatibility
	52132	Pitot tube standard mount base	2g	52132.STL	52132_Sketch	Mount base
	52133	Pitot Tube Cover	2g	52133.STL	52133_Sketch	Mount cover

Servo Buss

Mounted in one of my Mini Talons

Image	Part Number	Part Description	Weight	Print File	Drawing	Compatibility
	52130	Servo Buss, 6 pin	2g	52130.STL	52130_Sketch	Small servo buss holder
	52131	Gusset, servo buss	2g	52131.STL	52131_Sketch	Servo buss support gusset