Mini Talon Noses2

March, 2017

Introduction

This article is my final on the subject of the Mini Talon front canopy. I have redone the feature set that makes up this 3D model smoothing out the surface and profile and changing the NACA style vent to side air scoop type vents. It prints more cleanly now and I have added a version which will support either the Geared Pan & Tilt or the 390deg Pan & Tilt. Below you will find the latest versions of this fun design with downloads for all the printable STL files.

Plain Canopy

If you want to simply cover the nose for a more appealing look or need something to fit to your own structure this may be the part you want.

Image	Part Number	Part Description	Weight	Print File
	47001	Canopy, Plain	29g	47001.STL
	52001	Canopy support, front	9g	52001.STL
	52002	Canopy support, rear	4g	52002.STL
	52004	Optional HS1177 Camera Mount	4g	52004.STL
	52005	Optional HS1184 Camera Mount	4g	52005.STL

Install

Use E6000, Beacons FoamTac or UHU-POR glue to fasten front support and rear catch in place.

Print Recomendations

ABS is recommended for this part. It will fit and work fine on 0.2mm resolution and slow to moderate print speed.

Static Camera Mounts

This version has a cut-out and platform for the Mobius style HD cams and is the most aerodynamic of all the camera mount units.

Image	Part Number	Part Description	Weight	Print File
	47003	Canopy, Mobius Mini	29g	47003.STL
	47005	Canopy, Mobius/Runcam	29g	47005.STL
	54002	Front deck plate	TBA	54002.STL
	54001	Rear deck plate	TBA	54001.STL
	52006	Canopy support, rib	4g	52006.STL
	52007	Camera mount plate	4g	52007.STL
	52004	Optional HS1177 Camera Mount	4g	52004.STL
	52005	Optional HS1184 Camera Mount	4g	52005.STL