Parts Catalog - General Parts

From ItsQv
(Redirected from General Parts Catalog)
Jump to: navigation, search

Current Parts Catalogs
Cc image.png Mark Qvale - 2017

GenParts.jpg
   


Introduction

Like the Mini Talon Parts Compilation Page, this is a collection of 3D print parts. The parts on this page are more general in nature which means they can be used on different airframes and applications. These have all been printed and tested.

Many of the parts found here are also on my Thingiverse pages although since all parts are published here first, this is where you will find the most current versions. As on Thingiverse, everything found here is protected by Copyright and licensed under the terms of the Creative Commons "Attribution-NonCommercial-ShareAlike 4.0 International" license.

NOTE: This catalog will constantly change with additions and revision changes.

General Parts

Aeronaut Prop Parts

FPA054sm.jpg



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
10001sm.JPG  10001  Prop Stop Insert 38mm x 5mm  6g  10001.STL  10001_Sketch  Fits all Aeronaut 38mm Yokes.
10002sm.JPG  10002  Prop Stop Insert 38mm x 6mm  6g  10002.STL  10002_Sketch  Fits all Aeronaut 38mm Yokes.
10003sm.JPG  10003  Prop Stop Insert 38mm x 8mm  6g  10003.STL  10003_Sketch  Fits all Aeronaut 38mm Yokes.
10004sm.JPG  10004  Prop Stop Insert 42mm x 5mm  7g  10004.STL  10004_Sketch  Fits all Aeronaut 42mm Yokes.
10005sm.JPG  10005  Prop Stop Insert 42mm x 5mm  7g  10005.STL  10005_Sketch  Fits all Aeronaut 42mm Yokes.
10006sm.JPG  10006  Prop Stop Insert 42mm x 5mm  7g  10006.STL  10006_Sketch  Fits all Aeronaut 42mm Yokes.
10011sm.JPG  10011  Prop Stop Insert 35mm x 5mm  7g  10011.STL  10011_Sketch  Fits HobbyKing 35mm Yokes.





Antenna SMA Flare Nut Wrench

 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
10012sm.JPG  10012  Antenna SMA flare nut wrench  5g  10012.STL  10012_Sketch  Thumb wrench for SMA connectors.





Battery Strap Guides

BSG Installed.JPG



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
10015sm.JPG  10015  Battery Strap Guide 35mm  5g  10015.STL  10015_Sketch  Flat, external battery strap guide
10016sm.JPG  10016  Battery Strap Guide 40mm  5g  10016.STL  10016_Sketch  Flat, external battery strap guide, 40mm wide
10017sm.jpg  10017  Battery Strap Guide 50mm  5g  10017.STL  10017_Sketch  Flat, external battery strap guide, 50mm wide





Bungee Saver

First released in my article How To - Simple Bungee Launch Set-up, this piece will help keep your 6mm bungee chords in good shape.

Bung2.JPG



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
52186sm.JPG  52186  Bungee Saver, 6mm  5g  52186.STL  52186_Sketch  Designed to fit 6mm O.D. tube





DragonLink Parts

MicroRX Saddle Mounts

RXM03C.jpg



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
47016sm.JPG  47016  DragonLink MicroRX Mount  5g  47016.STL  47016_Sketch  DragonLink MicroRX Mount for v2 RX
47017sm.JPG  47017  DragonLink MicroRX v3 Mount  5g  47017.STL  47017_Sketch  DragonLink MicroRX Mount for v3 RX




RX Dipole Antenna Mount

5204X.jpg



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
52040sm.JPG  52040  DragonLink 433 Antenna Mount LT  5g  52040.STL  52040_Sketch  DragonLink 433 Antenna Mount left half
52041sm.JPG  52041  DragonLink 433 Antenna Mount RT  5g  52041.STL  52041_Sketch  DragonLink 433 Antenna Mount right half





Li-ion Pack Caps

Sqr Assy.jpg



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
10018sm.JPG  10018  Li-ion Cap, 2x, A  3.0g  10018.STL  10018_Sketch  Li-ion battery pack cap for 2 cells, A end
10019sm.JPG  10019  Li-ion Cap, 2x, B  3.0g  10019.STL  10019_Sketch  Li-ion battery pack cap for 2 cells, B end
10020sm.JPG  10020  Inline Li-ion Cap, 3x, A  3.7g  10020.STL  10020_Sketch  Inline Li-ion battery pack cap for 3 cells, A end
10021sm.JPG  10021  Inline Li-ion Cap, 3x, B  3.7g  10021.STL  10021_Sketch  Inline Li-ion battery pack cap for 3 cells, B end
10022sm.JPG  10022  Stacked Li-ion Cap, 3x, A  4.1g  10022.STL  10022_Sketch  Stacked Li-ion battery pack cap for 3 cells, A end
10023sm.JPG  10023  Stacked Li-ion Cap, 3x, B  4.1g  10023.STL  10023_Sketch  Stacked Li-ion battery pack cap for 3 cells, B end
10024sm.JPG  10024  Stacked Li-ion Separator, 3x  0.6g  10024.STL  10024_Sketch  Stacked Li-ion battery pack separator for 3 cells
10025sm.JPG  10025  Inline Li-ion Cap, 4x, A  4.9g  10025.STL  10025_Sketch  Inline Li-ion battery pack cap for 4 cells, A end
10026sm.JPG  10026  Inline Li-ion Cap, 4x, B  4.9g  10026.STL  10026_Sketch  Inline Li-ion battery pack cap for 4 cells, B end
10027sm.JPG  10027  Square Li-ion Cap, 4x, A  4.7g  10027.STL  10027_Sketch  Square Li-ion battery pack cap for 4 cells, A end
10028sm.JPG  10028  Stacked Li-ion Cap, 4x, B  4.7g  10028.STL  10028_Sketch  Stacked Li-ion battery pack cap for 4 cells, B end
10029sm.JPG  10029  Square Li-ion Separator, 4x  0.8g  10029.STL  10029_Sketch  Square Li-ion battery pack separator for 4 cells





NACA Style Ducts

Straight Ducts

NMT52.jpg



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
52120sm.JPG  52120  NACA Duct, 22mm, straight  5g  52120.STL  52120_Sketch  General NACA Duct with a 22mm opening
52121sm.JPG  52121  NACA Duct, 32mm, straight  5g  52121.STL  52121_Sketch  General NACA Duct with a 32mm opening




Curved Ducts

 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
52122sm.JPG  52122  NACA Duct, 22mm, Curved  5g  52122.STL  52122_Sketch  Fits a slightly curved surface
52123sm.JPG  52123  NACA Duct, 32mm, curved  5g  52123.STL  52123_Sketch  Fits a slightly curved surface
52125sm.JPG  52125  NACA Duct, 20mm, curved  5g  52125.STL  52125_Sketch  Fits a slightly curved surface




Specific Airframes

 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
52119sm.JPG  52119  NACA Duct FX-61  5g  52119.STL  52119_Sketch  These ducts fit over the bottom finger holes in the FX-61
52124sm.JPG  52124  NACA Duct, Nano-Talon Hatch  5g  52124.STL  52124_Sketch  Replaces the lame NACA duct on the Nano Talon
52126sm.JPG  52126  NACA Duct, Mini Talon Hatch  5g  52126.STL  52126_Sketch  Fits the Mini Talon hatch





Pitot Tube Mounts

Standard APM Pitot Tube Mount
A simple snap together, small mount for early APM analog pitot tubes.

PTM03.jpg
Mounted on one of my Mini Talons


PT Mount.JPG


Pitot Tube Dwg.JPG



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
52132sm.JPG  52132  Pitot tube standard mount base  2g  52132.STL  52132_Sketch  Mount base
52133sm.JPG  52133  Pitot Tube Cover  2g  52133.STL  52133_Sketch  Mount cover




Vector V1 Low Profile Pitot Tube Mount
This mount is shaped to fit near the wings leading edge or near the rounded nose of the fuselage.

VPM02.JPG



VPM01.JPG



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
10030sm.JPG  10030  Vector, Low Profile, Pitot Tube Mount Base  2g  10030.STL  10030_Sketch  Fits the V1 pitot tube
10031sm.JPG  10031  Vector, Low Profile, Pitot Tube Mount Cap  2g  10031.STL  10031_Sketch  Fits the V1 pitot tube




Vector V1 Standard Pitot Tube Mount

VASM01.jpg



VASM03.jpg



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
10032sm.JPG  10032  Vector, Standard Pitot Tube Mount, 32mm, A  4g  10032.STL  10032_Sketch  A Side, 32mm tall, Fits the V1 pitot tube
10033sm.JPG  10033  Vector, Standard Pitot Tube Mount, 32mm, B  4g  10033.STL  10033_Sketch  B Side, 32mm tall, Fits the V1 pitot tube
10034sm.JPG  10034  Vector, Standard Pitot Tube Mount, 45mm, A  4.7g  10034.STL  10034_Sketch  A Side, 45mm tall, Fits the V1 pitot tube
10035sm.JPG  10035  Vector, Standard Pitot Tube Mount, 45mm, B  4.7g  10035.STL  10035_Sketch  B Side, 45mm tall, Fits the V1 pitot tube





RMRC VTx Mount Cases

Three simple VTx case versions for the RMRC de-cased VTx's.

VTX Case.JPG



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
52175sm.JPG  52175  RMRC VTx Mount Case, 200mw 4.3g  52175.STL  52175_Sketch  Fits de-cased RMRC 200mw VTx
52170sm.JPG  52170  RMRC VTx Mount Case Cover, 200mw 0.7g  52170.STL  52170_Sketch  Fits 52175 Case.
52171sm.JPG  52171  RMRC VTx Mount Case, 800mw 4.6g  52171.STL  52171_Sketch  Fits de-cased RMRC 800mw VTx
52172sm.JPG  52172  RMRC VTx Mount Case Cover, 800mw 1.7g  52172.STL  52172_Sketch  Fits 52171 Case.
52173sm.JPG  52173  RMRC VTx Mount Case, 1500mw 5.1g  52173.STL  52173_Sketch  Fits de-cased RMRC 1500mw VTx
52174sm.JPG  52174  RMRC VTx Mount Case Cover, 800mw 2.1g  52174.STL  52174_Sketch  Fits 52173 Case.





Runcam Split - Camera Case

Three simple camera case versions for the RunCam Split. Please see build page for more information:
RunCam Split Camera Case

RCSplit Case.jpg



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
52067sm.JPG  52067  RunCam Split PCB Top Cover 4.3g  52067.STL  52067_Sketch  Fits RunCam Split V1
52076sm.JPG  52076  RunCam Split SD Card Snap Cover 0.7g  52076.STL  52076_Sketch  Fits 52067 Cover.
52086sm.JPG  52086  RunCam Split PCB Cover Bottom, Extended Mount 4.6g  52086.STL  52086_Sketch  Fits RunCam Split V1
52087sm.JPG  52087  RunCam Split PCB Cover Bottom, Integrated Mount 4.5g  52087.STL  52087_Sketch  Fits RunCam Split V1
52088sm.JPG  52088  RunCam Split PCB Cover Bottom, Standard Mount 3.1g  52088.STL  52088_Sketch  Fits RunCam Split V1





Servo Buss Case

52130.JPG



NMT21.jpg
Mounted in one of my Mini Talons



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
52130sm.JPG  52130  Servo Buss, 6 pin  2g  52130.STL  52130_Sketch  Small servo buss holder
52131sm.JPG  52131  Gusset, servo buss  2g  52131.STL  52131_Sketch  Servo buss support gusset





Tow Hooks

THS01.jpg



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
52212sm.JPG  52212  Simple Tow Hook  2.8g  52212.STL  TBA  Simple Tow Hook, 40mm x 4mm x 16mm
52235sm.JPG  52235  Simple Tow Hook with Flange  3.0g  52235.STL  TBA  Simple Tow Hook with Flange, 40mm x 4mm x 16mm, flange - 10mm x 16mm x 2mm
52236sm.JPG  52236  Collapsible Tow Hook Base  7.0g  52236.STL  CTH_DWG.PDF  Collapsible Tow Hook, 48mm x 24mm x 12mm





Matek F405-wing Cover

52188.JPG



 Image Part Number  Part Description  Weight Print File Drawing  Compatibility
52188sm.JPG  52188  Matek F405-wing Cover  1.2g  52188.STL  52188_Sketch  Flight controller cover with GPS mount




See Also