Difference between revisions of "FPV Video Transmitter Case"

From ItsQv
Jump to: navigation, search
Line 5: Line 5:
 
|-
 
|-
 
| align="left" valign="bottom" width="50%" | __TOC__  
 
| align="left" valign="bottom" width="50%" | __TOC__  
| align="right" width="50%" | [[File:VTX_Case.jpg|600px]]
+
| align="right" width="50%" | [[File:VTX_Case.JPG|600px]]
 
|}
 
|}
  

Revision as of 21:42, 19 October 2016

Gimbals
August 2014

Contents

VTX Case.JPG

Introduction

This simple video transmitter case houses the 400mw & 800mw 1.2G Tx's found at many RC sellers. One such seller is ReadyMadeRC.com. These transmitters come enclosed in a very heavy aluminum heat-sink case which can be discarded.

Simply cut a rectangle in the wing or fuse foam and glue the case in so the cover is flush. Tap the corner holes for a 2mm screw and you are ready to go. You can also add a pair of lightweight 22mm square heat-sinks (see picture) which only add about 8g.