Difference between revisions of "Collapsible Bungee Tow Hook"
From ItsQv
(→Hardware) |
(→Hardware) |
||
| Line 20: | Line 20: | ||
: M3 Hex Nut | : M3 Hex Nut | ||
| − | You can find the aluminum tube material at a local hobby store. Then follow the picture on drilling and shaping the tube | + | You can find the aluminum tube material at a local hobby store. Then follow the picture on drilling and shaping the tube before assembly. |
== Print Files == | == Print Files == | ||
Latest revision as of 01:47, 26 October 2016
August 2014
|
Introduction
After breaking a few tow hooks on my EPO Foam FPV planes, I came up with this collapsible tow hook. It requires a rectangular hole be burned (use a soldering iron) in the foam about 1/3 the distance from the wing spar to the nose. Then glue it in with Beacons FoamTac. Here are the parts:
Printed Parts
Tow_Hook_Base_v3.STL
Hardware
- 8mm x 5mm x 31mm Aluminum Tube
- M3 x 20mm Button Head Screw
- M3 Hex Nut
You can find the aluminum tube material at a local hobby store. Then follow the picture on drilling and shaping the tube before assembly.
Print Files
