Difference between revisions of "Collapsible Bungee Tow Hook"
From ItsQv
(→Hardware) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 16: | Line 16: | ||
=== Hardware === | === Hardware === | ||
| − | 8mm x 5mm x 31mm Aluminum Tube | + | : 8mm x 5mm x 31mm Aluminum Tube |
| − | M3 x 20mm Button Head Screw | + | : M3 x 20mm Button Head Screw |
| − | M3 Hex Nut | + | : M3 Hex Nut |
| − | You can find the aluminum tube material at a local hobby store. Then follow the picture on drilling and shaping the tube | + | You can find the aluminum tube material at a local hobby store. Then follow the picture on drilling and shaping the tube before assembly. |
== Print Files == | == Print Files == | ||
Latest revision as of 01:47, 26 October 2016
August 2014
|
Introduction
After breaking a few tow hooks on my EPO Foam FPV planes, I came up with this collapsible tow hook. It requires a rectangular hole be burned (use a soldering iron) in the foam about 1/3 the distance from the wing spar to the nose. Then glue it in with Beacons FoamTac. Here are the parts:
Printed Parts
Tow_Hook_Base_v3.STL
Hardware
- 8mm x 5mm x 31mm Aluminum Tube
- M3 x 20mm Button Head Screw
- M3 Hex Nut
You can find the aluminum tube material at a local hobby store. Then follow the picture on drilling and shaping the tube before assembly.
Print Files
