Difference between revisions of "Collapsible Bungee Tow Hook"
From ItsQv
(Created page with "== Introduction ==") |
|||
| Line 1: | Line 1: | ||
== Introduction == | == Introduction == | ||
| + | |||
| + | After breaking a few tow hooks on my EPO Foam FPV planes, I came up with this collapsible tow hook. It requires a rectangular hole be burned (use a soldering iron) in the foam about 1/3 the distance from the wing spar to the nose. Then glue it in with Beacons FoamTac. Here are the parts: | ||
| + | |||
| + | === Printed Parts === | ||
| + | Tow_Hook_Base_v3.STL | ||
| + | |||
| + | === Hardware === | ||
| + | 8mm x 5mm x 31mm Aluminum Tube | ||
| + | M3 x 20mm Button Head Screw | ||
| + | M3 Hex Nut | ||
| + | |||
| + | You can find the aluminum tube material at a local hobby store. Then follow the picture on drilling and shaping the tube befor assembly. | ||
| + | |||
| + | == Print Files == | ||
| + | |||
| + | |||
| + | |||
| + | <br><br><br> | ||
| + | [[Category:Contents]] | ||
Revision as of 21:34, 19 October 2016
Introduction
After breaking a few tow hooks on my EPO Foam FPV planes, I came up with this collapsible tow hook. It requires a rectangular hole be burned (use a soldering iron) in the foam about 1/3 the distance from the wing spar to the nose. Then glue it in with Beacons FoamTac. Here are the parts:
Printed Parts
Tow_Hook_Base_v3.STL
Hardware
8mm x 5mm x 31mm Aluminum Tube M3 x 20mm Button Head Screw M3 Hex Nut
You can find the aluminum tube material at a local hobby store. Then follow the picture on drilling and shaping the tube befor assembly.
Print Files
